p: 0845 466 47 48 e: sales@1staccessuk.com f: 0845 466 70 51
Aluminium Shopfronts
1st Access has built a good reputation on supplying a quality product with the service to match.
With our new 8,000sq ft work shop we are able to provide you with a full design and manufacturing facility for all your new Aluminium Shop Front, Roller Shutter and Automatic Door requirements, with our large stock of aluminium sections coupled with our stock of most commonly used laminated safety glass we can cut to size in house and with our 24hr powder coating plant we are able to complete the whole process from survey to installation in days rather than weeks.
We adapt to each clients specific needs, be it a single private shopfront or a national multipul refit program.
Our expert team can cater for superfast turnaround if you cannot secure your store
(ram raid) or give you pease of mind that if you are on a tight schedule to meet
a refit program we will be there to work with you from pre-
The custom made shop fronts are available in a range of glazing options, anodised or powder coated in a colour of your choice.
We specialise in refits and new builds, we can take out your old shopfront and fit with new, with the entrance system of your choice all compliant with current health and safety regulations.
The Shopfront system has profiles to suit both flush glazed and bead glazed applications, or a mix of the two. The standard dimensions are 100mm front to back and 45mm wide, with some sections having a width of 50mm or 100mm. The typical wall thickness of this system is 2.5mm. 3D frames can be achieved with the 90 degree and 135 degree corner posts, or with custom pressings for other angles.
Flush glazed
The flush glazed system has two different pocket widths to take a range of glass units or panels between 6mm and 24mm thick. The pocket profiles enable 'shuffle glazing' of the shopfront frame.
Bead glazed
The bead glazed system can accommodate glass units or panels up to 28mm thick by varying the beads used.
plant we are able to complete the whole process from survey to installation in days rather than weeks.
We adapt to each clients specific needs, be it a single private shopfront or a national multipul refit program.
Our expert team can cater for superfast turnaround if you cannot secure your store
(ram raid) or give you pease of mind that if you are on a tight schedule to meet
a refit program we will be there to work with you from pre-
The custom made shop fronts are available in a range of glazing options, anodised or powder coated in a colour of your choice.
We specialise in refits and new builds, we can take out your old shopfront and fit with new, with the entrance system of your choice all compliant with current health and safety regulations.
The Shopfront system has profiles to suit both flush glazed and bead glazed applications, or a mix of the two. The standard dimensions are 100mm front to back and 45mm wide, with some sections having a width of 50mm or 100mm. The typical wall thickness of this system is 2.5mm. 3D frames can be achieved with the 90 degree and 135 degree corner posts, or with custom pressings for other angles.
Flush glazed
The flush glazed system has two different pocket widths to take a range of glass units or panels between 6mm and 24mm thick. The pocket profiles enable 'shuffle glazing' of the shopfront frame.
Bead glazed
The bead glazed system can accommodate glass units or panels up to 28mm thick by varying the beads used.